The processing steps to achieve the chestnut the finished product are:
- Collection. The chestnut harvest takes place during the month of October when they fall from the tree. The "forest", the chestnut wood home, was, and in some places, still prepared for the collection, thanks to clean the underbrush from leaves and branches, so that the thistle (or curl) and chestnuts are clearly visible. Harvesting is done mainly by hand, using rakes and sticks to beat the Thistle when the chestnuts (usually 3 per urchin) are not yet any leakage. In general, the chestnuts are first put in baskets and baskets of woven wicker, and then be put into large bales of jute .
- Drying. The bales are taken to the chestnuts Canicce or metato . The Canicce is like a small house, where ground level is always lit a fire of chestnut wood and about 2 meters in height are placed to dry the chestnuts on a plane built by stakes, always chestnut. In this way the heat of the fire beneath the chestnuts are dried in about 20 days.
- Cleanup. Once the drying is cleaning the shell, through the threshing and sifting mesh smaller than the dried chestnuts, so as to remove the debris.
- roasting. After this procedure, in some cases, we proceed to roasted in special ovens.
- grind. Now the chestnuts are ready for the grinding mill in . The mills are generally water and stone grinders properly channeled. Following further screening and the product is ready for use and trade.
0 comments:
Post a Comment